Participants who are unable to register should be able to register on-spot on the day of that event
General Guidelines
In solo events, all the participants have to register individually.
In any group/Team event, only the group leader should register. Rest of the group members names will be entered by the organisers over a phone call after verifying with the group leader.
All the entries will be done on a first-come, first-serve basis.
Registration fee for the events needs to be submitted on the event day at the registration desk.
Slots will be confirmed only after the payment of registration fee.
Participants need to report at least an hour before the event starts.
Infotainment
A Decade with a Righteous Mind on 12th April,2019
An Infotainment program that brings the intellectual minds of SIEM to celebrate the 150th birth aniversary of the Father of the Nation as a part of a DECADE of our presence through ALACRITY-7.
Each team should have unique participants i.e. no two teams can have even a single participant common.
The right spirit of participation is expected from the participants.
A 220V AC power supply will be provided near the arena.
A plastic ball will be used for the game. The weight of the ball will be 50gm approximately and will have a diameter of 5cm.
The organizers reserve the right to change the rules.
Changes in rules, if any will be notified on the website.
Not more than 2 members from a team can control the bot at any time. One member should always manage the wires
The decision of the TECHNICAL team will be final and binding.
Gameplay Rules :
The main goal of a participating bot is to shoot the ball into the opponents goal post.
The Ball is to be taken across the field only by pushing. It cannot be clamped or lifted in the air.
At no point of time should the ball be covered by all sides by the participant’s bot or any part of it.
The robots may not hold the ball while moving. Dribbler mechanisms can be used; however the ball must have at least one direction for free motion.
Shooting is allowed with any appropriate mechanism.
The robots can use the side wall for reflecting the ball. It won’t be considered as a foul.
A participant’s bot is not supposed to interact directly with the opponent’s bot when it is not in possession of the ball. If one of the bot is in possession of the ball, the other can attempt to dispossess it by attacking only the ball.
Physical interaction between the bots in this process will be tolerated if it is judged that the attacking bot went for the ball.
If a bot is found to commit a foul (directly hitting/obstructing motion of opponent’s bot), the opponent will be given a free–shot.
In case of entangling of the wires there can be a restart , with the ball placed at the point where it was before the entangling of the wires, upon the discretion of the referee.
Damaging the arena in any form will lead to immediate disqualification.
After every goal being scored the ball would be placed back in the centre circle and each bot shall restart from their respective D-lines
Even own goals are counted.
As soon as the time elapses the time-limit of 5 minutes a match is over and the bot having maximum number of goals wins.
In case of a tie at the end of the stipulated time, there will be extra-time. If there is a tie after extra-time, first to score wins.
Robot Specifications.The size of the robot must be within the size limit- width = 25 cm, length = 25 cm, height = 25 cm.
For driving mechanism, a maximum of 4 motors can be used. However, additional motors can be used for kicker, striker, dribbler etc.
The bot can be wired or wireless.
The controlling wires should be bound into a single strip and long enough (preferably erected up to a certain height so that it does not entangle with the opponent’s wires or robot
The wires must remain slack throughout the event.
The total weight of bot should not exceed 3 kgs. The weight of the bot includes the remote control, batteries etc.
Only the group leader should register. Rest of the group member name will be entered by the organisers over a phone call after verifying with the group leader.
A maximum of 3 members can be in a team.
Participants are expected to carry a pen for the competition
Use of unfair means is prohibited and shall lead to disqualification.
Use of mobile phones or any such electronic device is strictly not allowed.
The decision of quizmaster shall be final and binding.
Rounds: Written eliminations followed by on-stage finals.
CIVIL ENGINEERS are born to build and every structure in this world is the gift of civil engineering, from ancient time to this 21st century. One after another, skills with knowledge comes out with every new generation and we use it for our benefits, so this is the time to come up with your skills along with the knowledge of yours to make something innovative or somewhat modified structure of the existing ones. In this competitive world, competition is required and we have to compete.
Maximum of four members are allowed in each group.
Only the group leader should register. Rest of the group member name will be entered by the organisers over a phone call after verifying with the group leader.
Bridge should be at least 650mm and maximum 1000mm long and 200mm high.
Bridge must be no wider than 150mm. The weight of the bridge should not be more than 500 grams.
The width of each support at each end is 20mm with balsa wood/popsicle sticks(6mm x 12mm x 1000mm).
It should take minimum weight of 1Kg.
Materials to be used are :
Balsa wood sticks/Popsicle sticks (6mm x 12mm x 1000mm) thick and you may take length as per requirement.
1 tube of quick drying epoxy glue.
1 piece of 5m long string to tie (if required).
No extra string will be provided apart from mentioned length of string.
The bridge will be loaded at the centre, so the wooden pieces must have enough space both vertically and horizontally so that the load hanger can be hanged well.
While test the bridge the load will be increased and it is tested to its extreme strength.
Vertical support will be provided by us to hold the bridge at both ends.
CIVIL DEPARTMENT
ROW,ROW,ROW YOUR BOAT
Event description
Participants need to build a boat in such a way that it can flow in water tank and sustain the weight placed in it.
Build a boat that can sustain a minimum weight of an object in a water tank.
Each team can have maximum 3 people.
Only the group leader should register. Rest of the group member name will be entered by the organisers over a phone call after verifying with the group leader.
Using of any material other than those provided can lead to disqualification.
The Boat that can sustain maximum weight in water tank would be declared winner.
No extra materials will be provided apart from mentioned quantity.
CIVIL DEPARTMENT
SLAB DESIGN
Event description
Participants need to apply their knowledge and concepts of designing and practically implement the design value to prepare a TWO -WAY SLAB from reinforcement
Only the group leader should register. Rest of the group member name will be entered by the organisers over a phone call after verifying with the group leader.
Time limit is 60 minutes.
Dimensions will be provided to the participants on the day of event.
Participants need to design the slab according to provisions mentioned in IS-456:2000.
IS code will not be provided to the participants.
Decision will be made on the basis of proper arrangement of reinforcement and given time limit.
All the necessary equipments and materials required will be provided to the participants .
CIVIL DEPARTMENT
QUIZ
Event description
Participants get to TEST their knowledge in the field of civil engineering and the subjects related to it.
Only the group leader should register. Rest of the group member name will be entered by the organisers over a phone call after verifying with the group leader.
A maximum of 3 members can be in a team.
Participants are expected to carry a pen for the competition.
Use of unfair means is prohibited and shall lead to disqualification.
Use of mobile phones or any such electronic device is strictly not allowed.
The decision of quizmaster shall be final and binding
Rounds: Written eliminations followed by on-stage finals.
NOTE: Quiz Modules are subject to change.
CIVIL DEPARTMENT
MODEL COMPETITION
Event description
Participants have to display the model based on (or related to) civil engineering showing their creativity and model building skills.
Models have to be made beforehand, only the display will happen during the competition.
It can be build by a team or individually.
Only the group leader should register. Rest of the group member name will be entered by the organisers over a phone call after verifying with the group leader.
Wooden block of 100mm x 60mm x 60mm are to be supplied.
Work piece presentation must be done by the candidate.
Drawing will be provided by the event co-ordinator at the venue.
Time provided to the candidate is max. 1hr 30 min.
Tools required are to be selected by the candidate for the respective job.
After carving out the piece the students will have to do extra work on the work piece like Polishing by Sand paper for good finish look.
MECHANICAL DEPARTMENT
QUIZ
Event description
Participants get to TEST their knowledge in the field of MECHANICAL engineering and the subjects related to it.
Only the group leader should register. Rest of the group member name will be entered by the organisers over a phone call after verifying with the group leader.
A maximum of 3 members can be in a team.
Participants are expected to carry a pen for the competition.
Use of unfair means is prohibited and shall lead to disqualification.
Use of mobile phones or any such electronic device is strictly not allowed.
The decision of quizmaster shall be final and binding.
Rounds: Written eliminations followed by on-stage finals.
NOTE: Quiz Modules are subject to change.
MECHANICAL DEPARTMENT
MODEL COMPETITION
Event description
Participants have to display the model based on (or related to) MECHANICAL engineering.
Models have to be made beforehand, only the display will happen during the competition
It can be build by a team or individually.
Only the group leader should register. Rest of the group member name will be entered by the organisers over a phone call after verifying with the group leader.
Can you design a simple circuit? This competition is all about making an electronic circuit that is cost effective and efficient.
The circuits will be very basic in nature and will not require any special knowledge to build.
Participants will be have to display their projects
The projects will be judged on the basis of the simplicity ,innovativity, practicalality and implementability of the design.
Should be able to describe their project to the judges.
The project should be within the topic. Each group should consist of minimum 2 and maximum 5.
The project can be either static or working.
ELECTRICAL DEPARTMENT
WIRE SPRINT (CIRCUIT DESIGN)
Event description
A circuit diagram is a graphical representation of an electric circuit. Circuit diagrams are used for design construction and maintenance of electric and electronic equipments.
In this Participants are asked to wire up a circuit. The circuits will be elementary.
Only the group leader should register. Rest of the group member name will be entered by the organisers over a phone call after verifying with the group leader.
A maximum of 3 members can be in a team.
Participants are expected to carry a pen for the competition.
Use of unfair means is prohibited and shall lead to disqualification.
Use of mobile phones or any such electronic device is strictly not allowed.
The decision of quizmaster shall be final and binding.
Rounds: Written eliminations followed by on-stage finals.
Every team will get a time slot of 7 minutes including setup.
Only Microphones will be provided for the instruments as well as vocals. A plug-in will be provided for Bass Guitars & Keyboards but FX-paddle is not allowed.
Use of abusive or foul language/sign or any violence will lead to disqualification of the team.
Each participant will be awarded with 5 minutes. Exceeding of time limit will result into negative marking.
Participants need to submit the instrumental track on which they are singing (if applicable), also participants have to carry the track on the event day. Else, ONLY ONE GUITAR is allowed.
Submission of the background track (If applicable) must be done two days prior to the event by E-mail.
A total of 15 minutes will be given to each team(5 minutes for set up and 10 minutes for Performance). Exceeding the time limit may lead to negative marking.
Alcohol, smoking, drugs etc. are not allowed inside the college campus.
Only a standard drum set without paddle will be provided.
Use of abusive or foul language/sign or any violence will lead to disqualification of the team.
Judges decision will be final and binding.
Any kind of damage will be charged from the band on spot.
All the drummers should carry there own snare and kick paddle.
Every participant should carry their own equipments and props. Only a sound unit will be provided by Alacrity team.
Maximum time limit: 5 minutes
Singing, Dancing & Rapping performances are not allowed.
Using of water, fire, glass or any harmful things is not allowed. Violent stunts are prohibited. In case of any injuries incurred during performance, Alacrity team & SIEM management will not be held responsible.
The decision by the Judges and organizers will be final and binding.
Only the group leader should register. Rest of the group member’s name will be entered by the organisers over a phone call after verifying with the group leader.
Participating team are at liberty to choose their own theme.
Only one group per institute is allowed.
The team members need to carry the track on the day of event in a pendrive.
Maximum time limit: 15mins.
Exceeding the time limit will result in negative marking.
A Minimum of 12 participants and a maximum of 20 participants should be in a group.
The decision by the Judges and organizers will be final and binding.
Everyone will get 5 minutes to perform including all set ups.
This is a solo event.
Participants need to submit the track on which they are singing, also participants have to carry the track on the event day. Submission of the track must be done two days prior to the event by E-mail.
Songs can be self composed of can be derived from pre-composed music.
Use of abusive or foul language is prohibited. Any use of such word may lead to disqualification of the participant.
Judges decision will be the final decision and binding.
Digital manipulation that distorts the reality of the photos will not be allowed. Only basic enhancements such as sharpening, contrast adjustment, or simple cropping will be allowed.
Entries must be the original and self taken.
This is an online event. Submissions to be submitted on FACEBOOK page of ALACRITY 7 from 6th April onwards.
Submissions should contain the followings :
ALACRITY ID
NAME OF EVENT
NAME OF PARTICIPANT
NAME OF INSTITUTION
Judging Criteria:
Winners will be decided on the basis of number of reactions on their photos.
All submitted photos must contain the original EXIF metadata information.
Basic editing, including color enhancement, the use of filters, and cropping of the Photo(s) is acceptable, provided any such editing does not affect the authenticity and/or genuineness of the Photo(s).
Submissions will not be accepted once the deadline lapses.
All photos are required to be submitted in pen drive only.
The photos are needed to be submitted before 1:30 PM in the conference hall on the final day of event.
All photos should be in JPEG format only. Any other format if submitted will be disqualified.
Each participant can submit up to three (3) entries.
The winner’s photographs will be displayed on the official page of ALACRITY 7 in all social media platforms.
THE JUDGING
The judging panel shall assess and determine the winning Photos. The results and the winners will be announced on the day of event.
The decision of judging panel will be final and binding on all Participants in respect to all matters relating to the Contest.
EACH PARTICIPANT CAN SUBMIT 3 PHOTOGRAPHS, ONE FOR EACH TOPIC.
It is a team event. Each team may have maximum of 5 members only.
Topics would be provided on the spot.
5 minutes preparation time for each team.
Time limit for the presentation of the advertisement will 1-2 minutes.
Participants shall be judged on the basis of creativity, adherence to the topic, on-stage
presentation, coordination and overall appeal of the advertisement.
Caution should be taken to refrain from displaying obscenity, violence, prejudice,
defamation etc. in Advertisement.
